sochheat
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Gallery
Posts posted by sochheat
-
-
Hello all
I am currently doing a research on measurement of pressure and velocity at the same time in open channel flume using configuration of VI LABVIEW. For a pressure data, they are collected by using Honeywell pressure sensor (24PCEFA6G model) connected to data logger ( NI USB 6343 ) in Analog Input channel and will be collected in VI LabVIEW configuration as the velocity does. For the velocity data , an instrument of Acoustic Doppler Velocimeter (ADV) from Nortex company have been chosen ,
My purpose is to measure the pressure and velocity simultaneously in VI LabVIEW . Because i am a new of LabVIEW and coding so i have an issue to integrate of the ADV with LabVIEW , and how to collect the data in 3D as the measurement in Vectrino software does.
Unfortunately, i cannot find any similar resource of this integration ,
Velocity :
ADV characteristic %
1. Type of system : vectrino velocimeter- fixed stem
2. software version : 1.20+
3. Firmware version: 1.31+
3. cable : 10 m length
4. connector : 12 pin IP 68
5. communication I/O: RS232
6. Baud Rate: 300 - 115 200
7: output range : 0-5 V
8. Acoustic frequency: 10MHZ
9. Resolution : 0.45 dB
10. Dynamic range : 60 dB
11, Internal sampling rate : 200 - 5000 Hz
Ensegre , could you send the code of Gill sonic anemometers that you have done with to me , and it would be possible if you try to do with the ADV in VI LabVIEW ,
your kindly helping me is so appropriated.
if you need any specification of this device , i am happy to send you .
I am so happy and gratitude for your help ;
The Best regard
SOCHHEAT
-
Dear all,
I am a new using LabVIEW , and need to collect the velocity data from Acoustic Doppler Velocimeter (ADV) in LabVIEW.
How can I integrate the Acoustic Doppler Velocimeter (ADV) to Labview , ?
Anyone can help me will be so appreciated .
Thank in advance
Vectrino (ADV) and LabVIEW integration
in LabVIEW General
Posted
Hello all
Sorry that i am so late to come in ,
For the pressure measurement, i have configured it all in the task of VI LabVIEW and I can get the pressure data normally , but for the Acoustic Doppler Velocimeter (ADV or Vectrino) still has the problem with the VISA software communication.
It shows an error of VISA: (Hex 0xBFFF001D) The specified attribute is not defined or supported by the referenced resource . how can this problem be solved ?
your advice is so appreciated
thank you