san_gr

Well I did the project again from the beginning but this time I didn't use the DAQ assistant, instead I set it all manually. Then I stripped the data into channels and unraveled each channel and then with a switch I invert the data. After that I recombine everything and have it displayed on a graph. This way it works just fine! PS. Since English is not my native language, pardon any mistakes in the terminology

Hi, I'm not sure if the title is accurate. I have a vi where I have a DAQ assistant to monitor two analog channels and display them on a graph. I want to have a switch for each channel to be able to invert the corresponding graph. The way I tried to do it is create a custom scale in the DAQ assistant with the slope set to -1 and then using a "DAQmx channel" property node to change the "AI: custom scale name" property accordingly. Well I ran into 2 problems: 1. I couldn't figure out how to change a specific channel. Instead it says that if you don't specify a channel it will change all of them. 2. When I run the vi I get an error for the property node that says "Specified property cannot be set while the task is running." But I need to be able to change it while running. So.... HELP!

Hey I just saw your reply. I will try your method next week but from the way you described it, it doesn't seem that hard Thanks again

I see... Could you go into some more details about how to control the placement of the "door"?

Hey everyone, I'm not sure if this can be done at all but i'll give it a shot. I want to create a very unique indicator . I have made two custom indicators and I want to combine them. Some of you may remember that I was building an elevator simulation. To simulate the elevator movement, I customized a vertical pointer slide (called "elevator shaft") and to animate the elevator doors, I customized a vertical progress bar (called "door"). Is there a way to fix the second indicator to the first one so that the whole "door" moves up or down? PS. I have attached a simple vi too see how these 2 indicators are going to be used. demo1.vi

Well, I had some courses 5 years ago but we only did some while loops with a timer or a button and in every press (or tick) it was adding +1 to an indicator. So, basically this is the first time I'm actually using labview. But I have some basic knowledge in C programming and although LV is very different, I can pretty much understand how most of the things work. The thing is that I don't know any LV terminology (e.g. Val(signl), etc) or what kind of blocks are there and where to find them. But, for a first project I'm pretty happy with myself. See for yourself :D Elevator.zip

:oops: I meant jcarmody. Sorry dude!

I don't know what you say about Norm or jgcode but i tried what these guys suggested and it worked like a charm. It was exactly what i was looking for. Thanks again guys

I think this is exactly what I need. Thanks. To be honest I'm not sure I understood what you are suggesting but I think it's similar to what jcarmody says. Anyway thanks for the links. I will look into them.

Thanks for the reply. Since I'm quite new in Labview, could you explain a little bit more what to do with the property node? And also can you give me some more info about the other methods you propose?

Hi everyone, I am building a project that simulates 2 elevators in a 5 floor building. This is controlled by a microcontroller through serial. I have set up the communication part using many event and case structures and everything seems to work fine except from one thing. When the microcontroller sends 0xFF i want labview to send back some information of the elevator (position, status, etc). The way i did it is, when I receive 0xFF I set a boolean ("req_info") to true. Then I have an event structure that triggers when "req_info" changes value. But it doesn't seem to work. Enabling the "Highlight Execution" I can see that the case structure sets the boolean to true but the event doesn't trigger. Doing some other tests I realized that the event structure can not monitor boolean indicators only boolean controllers. Is that right? And if so then how can I solve the above problem? I hope my post is not very confusing

Yes! It opens with no problem. Thanks!

Hi guys, First of all I would like to welcome myself to the forum since that's my first post Now to the problem.... I've been working for a few days on a vi with no problems. Today I tried to open it again and I got a window showing that components are loading and then it freezes when it tries to load a "create empty matrix array" vi. I have to end the process from the task manager and restart labview. I've tried opening other vis and even previous versions of the one causing the problem and they all work fine. I'm attaching a screenshot of the window that opens before the program freezes and also the vi itself. Thank you in advance for any help elevator6.vi