doki
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Gallery
Posts posted by doki
-
-
have to communicate with the device via the opc server
But I want to connect to the device by LabVIEWError -1073807202 occurred at VISA Open in GPIB-VISA.vi
-
Hi
I've downloaded the Mod bus Library available
But when they run gives error
Second
I use RS485 link
Name: IFD6500 from delta company
I use LabVIEW version 2012
How to generate between LabVIEW and soft starter device
By Mod Bus protocol using VISA laibrary and RS485
How do I read and write to all parameter
Control and monitoring
then served as the interface as I have said "GUI"Please attach a similar example of what I want -
I need to help you to work project by LabVIEW
Idea of the project
Work on the external interface to control the Ketrical of Board of Water Pump
Electrical board contains
Soft starter a type: RVS-Dn 72 , solcon
Frequency converter type: VFD 075E43A , delta
I want to first:
A connection to soft starter and frequency converter "inverter" via RS485 link use Mod Bus Protocolwork GUI for soft starter:
The main menu contain several keys to work
Run ,START, soft START, stop , soft stop and Rest in the event of an Alarm and show the value of voltage and current.
The second list contain parameter settings to read values and work setting "write" .The third spectrum describes plant for voltage and current.
The same way we do for frequency converter but the main menu contain keypad to work high speed , low speed , run , stopAdded menu enables to work sequence certain for work different movements
Lab View contains a library of Mod Bus Protocol
I do not know how to use it
I have manual for mod bus soft starter and frequency converter
soft starter drives & frequencey converter
in Application Design & Architecture
Posted
hi,
I knew the problem
The problem was Visa laibrary is not installed
How to Write the address?
as a string? how??
thanks
in the modbus manual
Example 1 - Actual Data (3X References)
To read actual parameters 2 and 3 (Current and Voltage, addressed as 1 and 2 hex) of the
RVS-DN with a serial link number of 18, the host computer should send the following frame:
byte 1: Serial Link No. ($18)
byte 2: Function ($04)
byte 3: Starting Address High ($00)
byte 4: Starting Address Low ($01)
byte 5: No. of Points High ($00)
byte 6: No. of Points Low ($02)
byte 7: CRC_Low ($XX)
byte 8: CRC_High ($XX)
The RVS-DN response, (when Current = 400 % of FLA, and Voltage = 420V) is:
byte 1: Serial Link No. ($18)
byte 2: Function ($04)
byte 3: Byte Count ($04)
byte 4: Data High, parameter 2 ($01) (400)
byte 5: Data Low, parameter 2 ($90)
byte 6: Data High, parameter 3 ($01) (420)
byte 7: Data Low, parameter 3 ($A4)
byte 8: CRC_Low ($XX)
byte 9: CRC_High ($XX)
Note: $XX indicates Hexadecimal byte.
Do you write the address as a string, such as 180400010002 first calculat crc and write crc low& high in the string
Is there a way to calculate the crc directly without the need for computed
What are the functions necessary