Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by sochheat

  1. Hello all Sorry that i am so late to come in , For the pressure measurement, i have configured it all in the task of VI LabVIEW and I can get the pressure data normally , but for the Acoustic Doppler Velocimeter (ADV or Vectrino) still has the problem with the VISA software communication. It shows an error of VISA: (Hex 0xBFFF001D) The specified attribute is not defined or supported by the referenced resource . how can this problem be solved ? your advice is so appreciated thank you
  2. Hello all I am currently doing a research on measurement of pressure and velocity at the same time in open channel flume using configuration of VI LABVIEW. For a pressure data, they are collected by using Honeywell pressure sensor (24PCEFA6G model) connected to data logger ( NI USB 6343 ) in Analog Input channel and will be collected in VI LabVIEW configuration as the velocity does. For the velocity data , an instrument of Acoustic Doppler Velocimeter (ADV) from Nortex company have been chosen , My purpose is to measure the pressure and velocity simultaneously in VI LabVIEW . Because i am a new of LabVIEW and coding so i have an issue to integrate of the ADV with LabVIEW , and how to collect the data in 3D as the measurement in Vectrino software does. Unfortunately, i cannot find any similar resource of this integration , Velocity : ADV characteristic % 1. Type of system : vectrino velocimeter- fixed stem 2. software version : 1.20+ 3. Firmware version: 1.31+ 3. cable : 10 m length 4. connector : 12 pin IP 68 5. communication I/O: RS232 6. Baud Rate: 300 - 115 200 7: output range : 0-5 V 8. Acoustic frequency: 10MHZ 9. Resolution : 0.45 dB 10. Dynamic range : 60 dB 11, Internal sampling rate : 200 - 5000 Hz Ensegre , could you send the code of Gill sonic anemometers that you have done with to me , and it would be possible if you try to do with the ADV in VI LabVIEW , your kindly helping me is so appropriated. if you need any specification of this device , i am happy to send you . I am so happy and gratitude for your help ; The Best regard SOCHHEAT
  3. Dear all, I am a new using LabVIEW , and need to collect the velocity data from Acoustic Doppler Velocimeter (ADV) in LabVIEW. How can I integrate the Acoustic Doppler Velocimeter (ADV) to Labview , ? Anyone can help me will be so appreciated . Thank in advance
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.