dipanwita

I have PCI-8513 CAN card with RT system. When I run CAN loopback test from LABVIEW example finder, I=it is throwing error. First, I check self test and calibration also in NI MAX. Blink test is also worked. It is successfully done. My CAN Card has two CAN interface. Can anyone tell me the problem? Screenshot of error is attached. XNET version is 20.0

I have NI PCIe 6323 card installed on remote system. But In NI-MAX there is a red cross beside that and the reason its showing is that version mismatch. but currently DAQmx driver version is 19.1 for both HOST and REMOTE system still I am facing same problem. I Reset NI MAX configuration data as well. That is the reason I trying to keep all drivers in a same version. Here I am attaching the screenshots of my issues. I request to have a look on it and please let me know the issue.

I have a remote PXI system and I have configured it in NI-MAX. After that I can see NI-VISA version on remote system is 21.5 but on Host computer it is 20.0. As I am using LabVIEW 2017 , I have to downgrade NI-VISA version from remote system. I am not able to find any document on this problem. Can you please let me know how can I do it.

I have some doubts regarding NI PXIe devices and configuration. I am using LabView 2017, and I have installed NI-DAQmx 19.1.0 In Ni-MAX , under remote system I can see my device is connected. But beside Dev1 there is a red cross and that is throwing error. It is saying the version of DAQmx is different in remote system and local system. Even though I find it same. Still, I tried to reinstall it and giving some error "NI DAQmx 19.1.0 requires base system 6.0o Here, I have attached screenshots of the issues. I request you to verify it once and let me know how I can solve the problem.

I have some doubts regarding NI PXIe devices and configuration. I am using LabView 2017, and I have installed NI-DAQmx 19.1.0 In Ni-MAX , under remote system I can see my device is connected. But beside Dev1 there is a red cross and that is throwing error. It is saying the version of DAQmx is different in remote system and local system. Even though I find it same. Still, I tried to reinstall it and giving some error of base system. Here, I have attached screenshots of the issues. I request you to verify it once and let me know how I can solve the problem.

yes, I have installed LABVIEW 2017 before NI-CAN 17.0. I run quite a few times the CAN file to check if everything fine or not. but I do not find CAN palette or even examples under Find examples. Another point is there is no lib file present in NI-CAN installer. What should I do now? What would be a solution.

As My Labview version is 2017, I have installed NI-CAN 17.0. NI-XNET is for higher version I think so. I checked NI Example finder also, but there is no CAN example available. What can be the problem ? suggestion please. One more thing, I checked the installation path and I found there is no .lib File (Library palette) present. Is it the problem for all? if so please provide me correct download link or so. (though I always download from NI website)

I have installed NI CAN driver to communicate in LABVIEW. I can see CAN channel mentioned in NI MAX. But I cannot find the functions in function palatte. Am I missing any step or what is the problem behind it. Can anyone suggest. I am a beginner.

I have a H&H PLI Series Electrical Load in my laboratory. I am targeting to control this device by giving instruction using LABVIEW. Currently, as a interface medium I am using ethernet (LAN) for communication. I have downloaded specific driver (H&H PLI series) required for this device to use in LabVIEW. I am facing some difficulties in it such as providing SCPI commands which is in manual to this device but not receiving response from it. I need some help to resolve this matter. I am not able to understand the issue. I need some help. delta2.vi