ERROR-1073807343 using ELVIS II

[samewing]

Hello. I would be very grateful if you helped me with this trouble. I tried to supply voltage divider from function generator and to acquire voltage on the second resistor and voltage from generator with oscilloscope in LabVIEW. After compiling the project every time I have the same error (ERROR - 1073807343 Insufficient location information on the device or resource is not present in the system).

In field "Resource Name" I've tried to type DAQ::2 or DAQ::Dev2. After this I tried to change device name in MAX, but an error was the same.

I haven't find solution of my problem on forum. Can anybody tell me what I've done wrong? Thank you.

Edited November 21, 2012 by samewing

[asbo]

It sounds like the device is either damaged or not connected to your computer properly. I'd recommend reviewing NI ELVIS: Resources for Measurement and Instrumentation and NI ELVIS II Manuals to make sure you have it set up correctly.

[samewing]

It sounds like the device is either damaged or not connected to your computer properly. I'd recommend reviewing NI ELVIS: Resources for Measurement and Instrumentation and NI ELVIS II Manuals to make sure you have it set up correctly.

But it works, when i do it not with LabVIEW. When I launch VIs from Start->NI->NImx->Instruments, it works correctly.