Dale_Cooper Posted August 30, 2008 Report Share Posted August 30, 2008 I've been workin for a while with Agilent instruments, type 34401A, in labwiev, using SCPI commands. When the instrument do the measurement, it stays in remote state, that means the measurement value stays "frozen" on the display... My question is, does anybody know the SCPI command that changes the remote state to local, so the user doesn't have to do it manualy (push button on front panel)... Please help... Thanks! Quote Link to comment
TobyD Posted August 30, 2008 Report Share Posted August 30, 2008 QUOTE (Dale_Cooper @ Aug 29 2008, 05:40 AM) I've been workin for a while with Agilent instruments, type 34401A, in labwiev, using SCPI commands. When the instrument do the measurement, it stays in remote state, that means the measurement value stays "frozen" on the display...My question is, does anybody know the SCPI command that changes the remote state to local, so the user doesn't have to do it manualy (push button on front panel)... Please help... Thanks! Are you talking through the serial port (RS-232)? If so the commands are SYSTem:LOCal and SYSTem:REMote (you only need to send the capital letters) You can download the manual http://cp.literature.agilent.com/litweb/pdf/34401-90004.pdf' rel='nofollow' target="_blank">here - I haven't looked but it should have all of these commands in it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.