Eugene Posted October 5, 2009 Report Share Posted October 5, 2009 Hi guys, Currently i need to produce 4 digital ouput with 3V. The 4 input will be activated from Labview itself. What kind of DAQ should i buy? Regards, Eugene Quote Link to comment
dblk22vball Posted October 5, 2009 Report Share Posted October 5, 2009 most digital outputs are 5 V i Believe. It also depends on how much current you need to supply. A USB-6008 might work for you if you dont need a lot of current. Otherwise I would go with a USb Compact DAQ chassis (since it is powered), or if you need the 3 V only, you might need to go with a compactdaq relay module and feed 3 V through it. Quote Link to comment
PaulG. Posted October 5, 2009 Report Share Posted October 5, 2009 Measurement Computing makes some good DAQ equipment, too. It's a little cheaper than NI's and it comes with LV drivers. Quote Link to comment
Mark Smith Posted October 5, 2009 Report Share Posted October 5, 2009 I once used a NI 6541 and if I recall correctly, the digital outputs were configurable - I looked it up and they can be configured at 1.8, 2.5, 3.3, and 5.0. These are not inexpensive units, however. Mark Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.