Driver for PCI-DAS1002 card to be used with LV7.1

[cmaster]

hello

help needed installing PCI-DAS1002 card with labview7.1

Windows sees card, but labview does not seem to see it.

I know the PCI-DAS6000 series cards are meant to be equivalent to the NI cards, which labview

sees. Can anybody Please help?

Cheslin Ellis

[AnalogKid2DigitalMan]

Did you purchase their Universal Library that provides drivers for LabView? See:

http://www.measurementcomputing.com/cbicat...M19DA6EQRMF7X28

I do not know if their drivers allows MAX to see and configure the card, also do not know if it allows DAQMX functions support.

My personal policy is: Use National's software, then use their hardware. Saving a couple hundred $ by buying a non NI card can cost you a heck of a lot more in lost time and lack of dedicated support (and finger pointing!).

[porsenna]

I do not know if their drivers allows MAX to see and configure the card, also do not know if it allows DAQMX functions support.

4035[/snapback]

Not a chance...DAQ functions won't work. This is quite obvious.

Will DAS develop a LabVIEW LLB to provide support for their boards in LV? Dunno!

Using NI HW with LV is straightforward, other vendors' HW may be not worth the effort.

:ninja:

[cmaster]

Not a chance...DAQ functions won't work. This is quite obvious.

Will DAS develop a LabVIEW LLB to provide support for their boards in LV? Dunno!

Using NI HW with LV is straightforward, other vendors' HW may be not worth the effort.

:ninja:

4048[/snapback]

Thats dissapointing news. The university bought 10 of these cards and the local Measurement Computing technical support has apparently not been much help.

thanks anyway

Cheslin

[AnalogKid2DigitalMan]

cmaster:

I do not think all is lost, did you look into the universal library in the link I posted above?

DAQ functions and LV should work with the library, it is only $50.

But I do not think it is MAX nor DAQMX compatible.

[todd]

In the past, Measurement Computing support consistently went out of their way to explain to me the workarounds for getting their hardware working in LabVIEW.

[AnalogKid2DigitalMan]

On a somewhat related note of using MCC HW with NI LV:

http://forums.ni.com/ni/board/message?boar...uireLogin=False

[AnalogKid2DigitalMan]

And another related (not so good) thread I came across. Was not looking for MCC, but it came up in my daily browse of NI discussion forums.

http://forums.ni.com/ni/board/message?boar...ssage.id=107861

[cmaster]

And another related (not so good) thread I came across. Was not looking for MCC, but it came up in my daily browse of NI discussion forums.

http://forums.ni.com/ni/board/message?boar...ssage.id=107861

4093[/snapback]

Hi

Thanks for the help and the links.

Our Labview "Expert" eventually got the card working in Labview.

Just thought that i should mention it.

thanks

Cmaster