how used the DSC

[alameer]

welcome for all

i have one Q :

how used the DSC in Labview 8 to make

1- data logging .

2- Securtiy .

3- Alarms .

4- Networking .

5- Trends .

for irrigation System Model contains 1-CONTAINER ( analog Value )

1- Pump ( Digital Value )

5 - Sensor Valve ( Digital )

1- Tensiometer ( analog Value ) .

totaly : 2 values analog .

6 values digital .

i will use DAQ Card to read values digital and analog .

[Jeff Plotzke]

how used the DSC in Labview 8 to make

1- data logging .

2- Securtiy .

3- Alarms .

4- Networking .

5- Trends .

This is a pretty vague question... If you haven't used LV DSC before, I'd start with LabVIEW Help / DSC Examples. They can give you a start for how to use DSC. I think NI has some examples/tutorials on their site as well.

[Rolf Kalbermatter]

welcome for all

i have one Q :

how used the DSC in Labview 8 to make

1- data logging .

2- Securtiy .

3- Alarms .

4- Networking .

5- Trends .

for irrigation System Model contains 1-CONTAINER ( analog Value )

1- Pump ( Digital Value )

5 - Sensor Valve ( Digital )

1- Tensiometer ( analog Value ) .

totaly : 2 values analog .

6 values digital .

i will use DAQ Card to read values digital and analog .

You could also have asked how to use a computer to create a program. Basically by learning the tools you have available for your use.

LabVIEW DSC is specifically an add on to solve most of those problems a bit easier although it is by far not a requirement. But giving you here a run down of what to do would be mostly a copy of the Getting Started with LabVIEW DSC manual and I would assume you have that at your hands.

Rolf Kalbermatter