Cannot make 10Gige Camera perform more than 1Gige

[Thang Nguyen]

After discussing with NI engineer, I found out LabVIEW can only support 10Gige Camera. So we bought device and set it up. The system include IDS GV-79L0WP-M and Broadcom NetXtreame 10Gige card. The problem we have is the NI MAX cannot acquire more than 1Gbps data speed. I checked all setup like jumbo packet, speed. But any time the speed increase, the network reach 100% and disconnect.

I wonder if you have any advice on how to solve this problem.

Thank you in advance!

Edited 17 hours ago by Thang Nguyen

[Thang Nguyen]

I figured out the issue.  I need to set the packet size at acquisition attribute of IMAX. The default value is 1040. It need to set to 8000.