E1472A VXI RF Mux Driver

[Kurt Meklenburg]

The driver for the Agilent E1472A RF 1x4, 6 Bank Mux Card does not work

HPE1472A.LLB

[Kurt Meklenburg]

The driver for the Agilent E1472A RF 1x4, 6 Bank Mux Card does not work

HPE1472A.LLB

[Kurt Meklenburg]

The driver for the Agilent E1472A RF 1x4, 6 Bank Mux Card does not work

HPE1472A.LLB

[Kurt Meklenburg]

The driver for the Agilent E1472A RF 1x4, 6 Bank Mux Card does not work

HPE1472A.LLB

[Kurt Meklenburg]

The driver for the Agilent E1472A RF 1x4, 6 Bank Mux Card does not work

HPE1472A.LLB

[Neville D]

I've used this module before in the distant past. What Slot0 controller do you have in your chassis?

The driver from NI assumed an NI controller if I remember right. Just read up the module info and try to send it simple SCPI command strings first before you try anything more complicated. You should be able to hear a small click as the reed relays inside click on or off.

I used an HP GPIB controller, and after some fiddling around was able to make it all work.

I had to program the individual registers to get the open/close combinations I needed; can't remember if I used the NI drivers.

Neville.