Jump to content

Report

  • Similar Content

    • By New
      Good morning! I am unsing LabView for the first time and I am already facing some problens.
      I tried to connect LabView with the dll and header (Insert ) however even if I include the paths to the other headers, LabView can not fing the demands for the functions.
      Can LabView connect to a header file, which is connected to a few other ones? Or am I choosing the wrong "main" header?
       
      I thought I could just write down the demands in the preprocessor definitions, however I can't even find them myself in the headers. (I didn't write the headers myself , everything came with a software I am working with)
       
      What am I doing wrong?
      Thanks!

      GenericDeviceInterfaceDLL_x64.dll GENERICDEVICE_DLL_DEMO.h stdafx.h resource.h GENERICDEVICE_DLL_DEMODlg.h GenericDeviceInterface.h
    • By Makrem Amara
      Hi there,
      I am working on a machine vision project with LabVIEW.
      The camera will locate some parts and send their coordinates via TCP/IP 
      and I created a client also with LabVIEW to display these coordinates here is how the communication going.
      First, if the camera detects something then msg will be sent to the client to inform him.
      then if msg was received correctly client responds with another msg to request the coordinates. 
      at last, the server sends the coordinates to the client. 
      here I faced some problems
      1- the msg sent are with variable length ("x=0,y=0,Rz=0"==> "x=225,y=255,Rz=5" ==> "x=225,y=255,Rz=90"  length vary between 16 and 22 ) with the constant "byte to read " it will not display the full msg.
      2-the client works fine but at a certain time, it shows errors like ("LabVIEW: (Hex 0x80) Open connection limit exceeded";;;;;; "LabVIEW: (Hex 0x42) The network connection was closed by the peer. If you are using the Open VI Reference function on a remote VI Server connection, verify that the machine is allowed access by selecting Tools>>Options>>VI Server on the server side"
       
       





    • By drjdpowell
      I am just starting on trying to be able to use Python code from a LabVIEW application (mostly for some image analysis stuff).  This is for a large project where some programmers are more comfortable developing in Python than LabVIEW.  I have not done any Python before, and their seem to be a bewildering array of options; many IDE's, Libraries, and Python-LabVIEW connectors.  
      So I was wondering if people who have been using Python with LabVIEW can give their experiences and describe what set of technologies they use.
    • By Yaw Mensah
      I have installed Labview 2020 on Dedian Buster using the rpm to deb conversion method via alien. Due to Architecture mismatch i deleted the *i386.rpm files before conversion.
      My Problem is that after creating a project at "Build Specification"-> "rigth click" i am only able to select "Source Distribution". Application does not show up as an option. 
      I will be grateful for any suggestions.
      Thank you in advance.
    • By javier_r
      VIPM.io now allows you to post LabVIEW Resources, Ideas, and Tools. For example, you could post a link to a video tutorial or blog article about a package. You can also post ideas, like feature requests or new tools. Best of all, package developers are notified when you post your ideas and resources, and you can comment and discuss posts with the community. Take a look at this video to learn more: https://www.vipm.io/posts/664960df-f111-4e13-989a-24be8207182d/

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.