Jump to content
  • Similar Content

    • By bbean
      I put together a simple xnode to relabel event registration reference wires that feed into dynamic events of event structures.  With the increasing use of event based messaging systems, I found myself manually changing the name of event registration references to clarify the event name when multiple event registration references were used in an object. I did this by manually creating a cluster constant on the build cluster before the dynamic registration terminal on the event structure and renaming each registration reference.  Being a lazy programmer, this seemed tedious after a few times so I decided to attempt to create an Xnode to accomplish the same thing faster.   This video shows the "problem" and the potential solution using the xnode: 
      Re-Label Xnode - Event Registration
      Here's another example showing another use case with ShaunR's VIM HAL Demo code:
      Re-Label Use Case ShaunR HAL Demo
      This may have been done before or there may be an easier way to do this, but I wanted to throw it out here to see if there's any interest and to see if people will try it out and give feedback.  I've found it works best using quick drop for initial use (highlight wire, CTRL-Space,type re-label, CTRL-I, type new name in dialog) and for replacing or renaming an existing instance on the diagram (highlight existing xnode, CTRL-Space, type re-label, CTRL-P, type revised name in dialog).  You can also use directly from the palette, but I found much faster from quick drop and also seen a couple crashes replacing through the pallete.  
      The Double Click ability is also a work in progress.  Its purpose is to allow you to quickly rename the relabel with the same dialog box, but when it executes it breaks the wire on the output connection.  You can still re-wire it to the event structure, but you will have to open the Event Structure Edit Events menu to get the event to "Re-link".  Something I'm trying to avoid.
      The Xnode generated code is simply a pass through wire with the output terminal renamed to the label of your choice.  This seems to update attached event structures.

      - B
      sobosoft_llc_lib_diagram_tools-1.0.4.1.vip
    • By bI0ndin
      Hi everybody,
      While I was having some time to develop new scripting stuff i wondered "would it be possible to add somme scripting stuff in the VI toolbar ? " (the one with run, run-continuously, abort, police stuff and so on). My point is to add kind of a combobox that populate with every events in the current vi for a control when clicking on it. And of course show the effective event and make it blink when selecting it in the combobox.
      The scripting part is almost done but i now come to the real problem : 
      "How can I add this piece of code in the VI toolbar ?"
      I know i can create either a Quidrop Plugin or a shortcut menu plugin but they don't fit the way i wan't to use this plugin.
      I asked some NI guy that told me the only options where the one above but I can't imagine that LabVIEW is not in some way developed around a "plugin architecture" so if any of you as plunge deep into LabVIEW's files and know where and how to achieve this goal it would be really nice
      Thank's everybody and I hope my question was clear.
    • By Tripmeister
      Hey guys,
       
      I'm trying to do some scripting on a Realtime-VI wich uses the FPGA Interface "Read/Write Control". I open a Reference to a VI containing a Read/Write Control, and when scrolling through the BD-Objects I find it with the class-name "nirviReadWriteControl".
      I used the "to more specific class"-VI to check wich class i can cast it to, and i tracked it down to be child of the GObject->Node Class. But i can't cast it to any of the childs offered in the class specifier constant.
      I also found out, that the "nirviReadWriteControl" is a xnode.
      I have never worked with those, is there a way to access theyr methods (I think they're called "abilities" for xnodes)?
       
      The goal of the application is to make the Read/Write Control display all available FPGA FP-Elements, and connect Controls/Indicators to them.
       
      There is the same Problem with the "Open FPGA Reference"-Node (Classname "nirviOpenFPGA").
       
      I really hope somebody dealed with the xnodes a bit and can help me programmatically controlling them!
       
      Best,
      Trip
    • By bbean
      After reading this LabVIEW Idea exchange request:
      http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Provide-a-better-way-to-implement-a-polymorphic-VI/idi-p/920487
       
      I was inspired to create VI macro(s) to attempt to address the problem mentioned in the request.  Attached is my first attempt and I'm looking for feedback since I know people here have strong opinions.   The benefit of this method is that a single vim (or 2 could replace a polymorphic VI with over 48 separate VIs....unless I'm missing something.  I know that VI macros are not officially supported by NI, but that hasn't stopped us from using unsupported features before.  Some people have probably already done something like this, but I couldn't find an example.
       
      To use the files, unzip them and copy them all to your \LabVIEW (version)\user.lib\macros\ directory.  
      Create the directory if it does not exist.  For example: C:\Program Files (x86)\National Instruments\LabVIEW 2014\user.lib\macros\   And as described in the wait-ms-with pass through post below, modify your LabVIEW.ini file to have the following     ExternalNodesEnabled=True and Optionally     XNodeWizardMode=True   http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Wait-ms-with-error-pass-through/idc-p/3178218#M31820
       
      Open the Example Changed.vi and review.
      Changed Example.zip
    • By Abhinav Kothari
      Hey Guys,
       
      I am a student of Masters in Mechatronics and have a project relative to creating ExNodes in Labview to recreate the PID Controller. I come from a Mechanical background and have very minimal knowledge with LabVIEW.
       
      I tried learning how to script (as I read that it is important to know how to script to learn to create ExNodes) but am finding difficulty in that as well. I wanted to know if someone could take time and explain me step by step on how to script on LabVIEW and also create ExNodes so that I can learn to create the PID Controller algorithm on LabVIEW.
       
      If you guys could also help me with author names to books which help me learn LabVIEW from the start to end, it would be great. Hoping to read positive responses soon. 
       
      Regards
       
      Abhinav
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.