Jump to content

Recommended Posts

Hi there,

I am working on a machine vision project with LabVIEW.

The camera will locate some parts and send their coordinates via TCP/IP 

and I created a client also with LabVIEW to display these coordinates here is how the communication going.

First, if the camera detects something then msg will be sent to the client to inform him.

then if msg was received correctly client responds with another msg to request the coordinates. 

at last, the server sends the coordinates to the client. 

here I faced some problems

1- the msg sent are with variable length ("x=0,y=0,Rz=0"==> "x=225,y=255,Rz=5" ==> "x=225,y=255,Rz=90"  length vary between 16 and 22 ) with the constant "byte to read " it will not display the full msg.

2-the client works fine but at a certain time, it shows errors like ("LabVIEW: (Hex 0x80) Open connection limit exceeded";;;;;; "LabVIEW: (Hex 0x42) The network connection was closed by the peer. If you are using the Open VI Reference function on a remote VI Server connection, verify that the machine is allowed access by selecting Tools>>Options>>VI Server on the server side"

 

 

tcp3.png

tcp2.png

tcp1.png

client2.png

client1.png

Link to comment

1. Standard way for variable length strings is to prepend the length.

image.png.49686324c158c58f146181768e1f9826.png

2. The connection was closed. This can happen as part of normal communication, for example, when you press stop in loop C. This is because you will explicitly close the connection while your read loop is trying to connect or read.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Guru Prasath
      Hello Everyone;
      How I plot the timestamp in the graph of the x-axis and numerical slider the timestamp given in 2d array.

      The array in 2d array of string...

      I will try this but it not plotting full timestamp can you help me to short of this problem.

      It will be a plot, but a few timestamps will plotting 
      How I plot full timestamp and date...
       
      I have attached my problems like the jpg file and .vi file for your reference.

      Does anyone have solution comments below...
      5_6285044541540009090.vi
      Thanks and Best regards...


    • By torekp
      I was trying a python http communication tutorial - https://aiohttp-demos.readthedocs.io/en/latest/tutorial.html#views - when I had to disable the NI Application Web Server to proceed.  And then I thought, what the **** am I doing?  Maybe I should take the free (well, prepaid) gift of a working web server.
      Here's my task.  A central HQ computer will have a GUI that monitors five machine stations, each of which has its own computer.  Every approx 10 ms (negotiable), each station gives a report consisting of two arrays, the larger being 2048 data points, the other much smaller.  Whenever HQ feels like it, HQ can tell a station to start or stop (its computer stays on).  A local IP connection is used, with a router at each end.  There is also a Raspberry Pi with its own IP address at each station's router, that can send camera frames to HQ.  The station-computers use Python and C++ to do their work, not counting whatever needs to be added to communicate with HQ.
      Your advice please?  Should I use Labview?  On both ends or just the HQ?  And which if any of these helpful add-ons suggested by Hooovahh should I use?
       
    • By AndyS
      Hi!
      I have to convert a dynamically generated array into a JSON string and back. Unfortunately I found that the un-flatten method loses the variant data. See the screenshot of FP and BD and the comments inside.
      JSON_Text_test.vi
       

       
      Is this a bug in JSON Text or is my data-construction not supported as expected? In case of the letter I have modify huge parts of my code. So I hope that it is a bug 😉
       
      The 2nd thing I recognized is that the name "Value" of the cluster is not used during flatten. Instead the name of the connected constant / control / line is used. I found the green VI ("Set Data Name__ogtk.vi") at OpenG Toolkit that allows me to programmatically set the variant data name. As you can imagine I would prefer not to need the OpenG VI.
       
      Thanks in advance for your kind help 🙂
       
    • By kartik.azista
      HAs anyone tried creating a sub vi programmatically by selecting the set of blocks through scripting?????
    • By TDF
      TDF team is proud to propose for free download the scikit-learn library adapted for LabVIEW in open source.
      LabVIEW developer can now use our library for free as simple and efficient tools for predictive data analysis, accessible to everybody, and reusable in various contexts.
      It features various classification, regression and clustering algorithms including support vector machines, random forests, gradient boosting, k-means and DBSCAN, and is designed to interoperate with the Python numerical and scientific libraries NumPy and SciPy from the famous scikit-learn Python library. 
       
      Coming soon, our team is working on the « HAIBAL Project », deep learning library written in native LabVIEW, full compatible CUDA and NI FPGA.
      But why deprive ourselves of the power of ALL the FPGA boards ? No reason, that's why we are working on our own compilator to make HAIBAL full compatible with all Xilinx and Intel Altera FPGA boards.
      HAIBAL will propose more than 100 different layers, 22 initialisators, 15 activation type, 7 optimizors, 17 looses.
       
      As we like AI Facebook and Google products, we will of course make HAIBAL natively full compatible with PyTorch and Keras.
       
      Sources are available now on our GitHub for free : https://www.technologies-france.com/?page_id=487
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.