Jump to content

Ergonomics and LabVIEW


TG

Recommended Posts

Greetings,

After many weeks of marathoning in LabVIEW I am beginning to see signs of serious trouble in my right(mouse) hand.

What ergonomic advice could I get here from the hard core advanced architects?

I am currently considering Track IR but is anyone able to use it for LV?

What ergonomic devices do you use and how effective are they?

Thanks in advance.

John

Link to comment

This is my top 10 list in the order of importance

  1. Excercise enough (sports, walking, ...)
  2. Avoid stress :thumbup:
  3. If you feel too much pain, stop working, it will only get worse
  4. Think more, you need to code less (or at least you get more results)
  5. Study more, you learn to code more effectively
  6. Choose an ergonomic office chair that fits to you well
  7. Keep short breaks at least every hour
  8. Adjust the table height so that you don't have to keep your hands at tension
  9. Get a docking station, external keyboard and external monitor if you are using a laptop
  10. Use a good laser mouse, I prefer Logitech MX Revolution

Link to comment

I like Tomi's list. I do something else too--I use a different mouse and keyboard at work and at home. At work, I use a Microsoft 5-button optical mouse, and at home I use an earlier version of the Logitech 5-button optical mouse. I use a Dell quietkey at work, but use a Microsoft Natural Keyboard (the original MS ergonomic keyboard--not the "elite" which sucks). I find that drinking tea and water while working helps with the hourly breaks. I go to the restroom every hour by afternoon if I'm drinking enough fluids.

QUOTE(Tomi Maila @ Mar 15 2007, 09:34 AM)

This is my top 10 list in the order of importance

  1. Excercise enough (sports, walking, ...)
  2. Avoid stress :thumbup:
  3. If you feel too much pain, stop working, it will only get worse
  4. Think more, you need to code less (or at least you get more results)
  5. Study more, you learn to code more effectively
  6. Choose an ergonomic office chair that fits to you well
  7. Keep short breaks at least every hour
  8. Adjust the table height so that you don't have to keep your hands at tension
  9. Get a docking station, external keyboard and external monitor if you are using a laptop
  10. Use a good laser mouse, I prefer Logitech MX Revolution

Link to comment

QUOTE(John Rouse @ Mar 15 2007, 01:11 PM)

Greetings,

After many weeks of marathoning in LabVIEW I am beginning to see signs of serious trouble in my right(mouse) hand.

What ergonomic advice could I get here from the hard core advanced architects?

I am currently considering Track IR but is anyone able to use it for LV?

What ergonomic devices do you use and how effective are they?

Thanks in advance.

John

I also believe that simply learning to relax while you work (both physically and mentally) makes a HUGE difference. (It may actually take practice to learn to do this.)

Also - pay attention to minor physical discomforts. Some people ignore them because they are minor, but over time these minor discomforts can turn into serious and perphaps permanent injuries.

Then of course, as already mentioned - exercise! It doesn't have to be strenuous or lengthly to make a huge difference.

As for hardware, I have yet to find a mouse that is really ergonomic. (I find trackballs too difficult to program with)

Link to comment

excellent tips tomi.

I agree with gary, but i use TrackMan® Wheel http://www.logitech.com/index.cfm/products...,CONTENTID=5002

In reality windows is what made the mouse big. Autocad is a great example of how a software developer can integrate command line into cad software.

Learn coding shortcuts similar to those found in vi and vim. By learning keyboard shortcuts you really decrease the use of the mouse and improve your overall productivity - especially for a programmer like myself.

Link to comment

First

I urge you to concider seeing a doctor. CT can disable you. I was waking up at night with shooting pains in my forearms.

Second

Mice are evil creatures. They chew your wrists up. Never touch one again!

Continuing:

I managed to code in LV for about 5 years without any trouble. Then I did a 6 month 12 hour a day marathon and my problems started.

I now use a hacked up Mouse Pad

http://forums.ni.com/ni/board/message?boar...3&jump=true

that I flipped over and re-inforced with a steel plate to hold my Kensington Expert Mouse. The track ball is held to the mouse pad using a pair of small bungy cords. This lets me put my trackball were my hand falls rather putting my hand were the track ball is. It also permits me to adjust the angle so the palm of my hand is at about a 35 degree angle relative to the plane of the floor.

The mouse pad straps onto the arm of a chair so my hand is in the same "rest" position it would be in if I was just sittng there with a beer in my hand.

NOTE:

The slight twist of the wrist required with flat mouses or horizontally mounted track balls causes the two bones in my lower arm to cross while track balling.

I also have a pull out adjustable tray that lets me postition the keyboard, again, where my hands are rather than the other way around.

I also wear a pair of wrist braces (the fancy ones with three straps a splint and padding). The first day I put them one my writsts started feeling better.

I alos discovered that once I had done the damage, that driving my Cavalier was casusing problems. Oddly enough, this is not the case with my pcik-up. So i have a pair in the car I use while commuting.

As it stands today, I am pain free and have been so for alomost a year now. It would have been longer but I found myself debugging an application on-site without any of my aides. At that time I was scared I would be forced into an early retirement.

Closing:

I am not a doctor and none of the above should be concidered as such. If the pain is affecting your work, take action, otherwise it will get worse.

Ben

Link to comment

QUOTE(Ben @ Mar 15 2007, 11:14 AM)

First

I urge you to concider seeing a doctor. CT can disable you. I was waking up at night with shooting pains in my forearms.

A lot of good suggestions from all the above posts. I second the idea that any indication of pain should not be taken lightly, but rather acted on immediately to prevent potentially great discomfort. I ended up with chronic back/neck pain for the last 10 years. 90% sure it's from computer work (e.g. mostly LabVIEW). Tried almost everything but never found a silver bullet. Ergonomics is defnitely a good starting point, though. (Actually, I may be on the road to recovery at the moment. Just found a new PT who really seems to know about neck pain. It seems to be helping...)

I got the Kensington trackball mentioned above a couple weeks ago. Not quite an expert with it, but I like it so far. I've used Kensington Orbit trackballs for years. I have no problem getting trackballs to work for LabVIEW programming, but I know a lot of people who sit down at my computers are unable to use them very successfully. In any case, the new Kensington has a lot more functionality than the Orbit - four buttons plus a scroll wheel. (I haven't quite mastered the scroll wheel yet...) But I got tired of the Orbit not having a 3rd button or scroll wheel. The new one cost more, though.

I also tried a fancy touch pad, regular mice, and even a foot mouse. Never got them to work well for me. I could do regular computer work, but wiring in LV was difficult.

I also connected another Orbit trackball up to my computer (USB) and rewired it internally to switch left and right buttons, so I have another mouse available for switching off hands. I know another fellow who swears by this, but I don't tend to use it much.

Cheers,

Dave T.

Link to comment

I must raise up one more thing. I have had quite a lot of back and neck pain for last few years. I bought a new quite expensive Tempur-Pedic millenium pillow and it has really helped to releaf the pain, although not complitely. I didn't consider a pillow could make such a difference but it did. I'm now considering to buy a Tempur-Pedic mattress as well, but the price is quite a lot for a mattress so I've not made my mind yet.

Tomi

Link to comment

QUOTE(Jeff Plotzke @ Mar 15 2007, 10:23 PM)

A little off-topic... but has anyone tried LabVIEW on a tablet PC?

Not a tablet PC, but I often deploy my programs on touch screen PCs (with XP).

The touch screen on these things does not usually have the refined accuracy needed to do LV work.

Link to comment

regarding the kneck and shoulder thing.

I get that if I have to reach out for the trackball. By moving the trackball such that it is under my hand when I am sitting comforatbly, with my arms resting on the arms of my chair, I can eliminate that pain.

Think fetal position! We all spent 9 months in tha postion with problems. Organize your work space such that are as comfortable as possible.

Trying to help,

Ben

Link to comment

QUOTE(Catweazle @ Mar 19 2007, 07:22 AM)

They call it a "chair" but as you guess its actually both :yes:

Thanks guys

Been reallty busy last few days.

I Just read all your posts and now Im gonna study them.

Best regards

Link to comment
  • 4 months later...

QUOTE(John Rouse @ Mar 20 2007, 02:43 AM)

Thanks guys

Been reallty busy last few days.

I Just read all your posts and now Im gonna study them.

Best regards

I'm bumping this to bring it to the top.

Ill make another post.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.