# Ano Ano

Members

132

1. ## Data conversion of multiple inputs?

Hello, In the attached picture you will see that I have 10 inputs of DC signals and that I convert the multi-input waveform to DBL. If I had N-Inputs this would be very tedious! Is there a way to make a loop of some sort and avoid cluttering up the vi?
2. ## Labview to Excel

Thank you for the prompt reply! How do I make the vi to write to excel after the stop button is pressed, ie after all the data is collected? It keeps asking me to save the data at the beginning.
3. ## Labview to Excel

Hello, I am designing a threshold detector with 10 inputs. When the threshold is reached (and passed) there will be two data values. 1. The time it takes for each input to pass the threshold limit 2. The time starting from the threshold passing till the STOP button is pressed. 3. The total duration from the start of running till the STOP button is pressed. The I want to export to Excel these times and make a column for each of the 10 inputs. Also I need the vi to write to excel after the stop button is pressed. How can I do all these?
4. ## How to time multiple threshold changes

Hello, I am designing a threshold detector with 10 inputs (DC). these inputs change in amplitude. I want to find the time it takes for each input to pass the threshold limit. Using the tick count method I can get the time difference for one of the inputs but not for two or more. If i increase the amplitude on the input, i get the correct time difference, after a few seconds I try to increase the amplitude for the second input, and as soon as it passes the threshold then I get the same time difference in both inputs I want somehow to start a timer when the vi starts and as soon as the
5. ## Threshold Detector

OK I have attached my vi. I use 2 sinewaves with different amplitudes Using the tick count method I can get the time difference for one of the sinewaves but not for both! If i increase the amplitude on the first sinewave, i get the correct time difference, after a few seconds I try to increase the amplitude for the second sinewave, and as soon as it passes the threshold then I get the same time difference in both Why is this happening? This is very important for me as I am going to have 10 ramp signals and i need to know separate time for all 10, and display/export on a table Basic Leve
6. ## Threshold Detector

Thank you all for your replies and sorry for my long absence. Yes the Basic level trigger detection vi" is what I needed to turn on the LED. There is another issue though on how to log the time it takes from the minute I start the vi to the time that the threshold is reached (and passed) How can I do it?
7. ## Threshold Detector

Hello, I am a mechanical engineer and Newbie in Labview. I need to design a vi that will act as a threshold detector. I have 10 ramp signals and I want to get , for each signal, an LED turning on (in the front panel) when the the ramp signal rises and it passes a threshold. I also want to be able to log the time it takes for each of these LED's to turn on. I have tried the threshold vi that exists in Labview but I cannot get it to read that the threshold is reached and give a signal to the LED. Any ideas?
×