Jump to content

Qcam Firewire 1394 camera connection with LabVIEW


Recommended Posts

I want to connect My ccd camera with labview. The details of my system is given bellow. I cannot connect it please help
 
OS:  WINDOWS 7, 64bit
 
LabView Run-Time 2013(64-bit)
NI-IMAQ 4.8
NI-IMAQdx 4.3
 
Camera: QICAM Monochrome Cooled (QIC-F-M-12-C)
Model QICAM
Resolution 1392 x 1040
Sensor 1/2" Sony ICX205 progressive-scan interline CCD
Pixel Size 4.65 x 4.65µm
Cooling Type Peltier thermoelectric cooling to 25˚C below ambient
Digital Output 12 bit
Video Output FireWire (IEEE 1394b)
Max. Frame Rate 10 fps full resolution @ 12 bits
Pixel Scan 20, 10, 5, 2.5MHz
Mount Type C-mount optical format

 

 

Link to comment

Cannot physically connect it to your PC, cannot get an image out of it? What have you tried? I presume you have some sort of firewire interface care or framegrabber in your PC?

For me, before I even reach for LabVIEW I make sure the camera works properly in MAX. Have you gotten that far?

Edited by Neil Pate
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By kpaladiya
      I would like to build a model using image data and NI-cRIO-9063 and NI 9264 for voltage control.
      for image, I made a script in python using OpenCV libraries that detecting some points . For voltage control, I use cRIO-9063 with NI 9264 voltage controller.
      My question is, I am new in LabVIEW and I don't have any idea how can I make a loop for voltage control in python. Is there any library available in python that directly connect cRIO and NI 9264 devices? if not then how can I combine my image data(which is in python) with cRIO device? I need argent help.
    • By Makrem Amara
      Hi there,
      I am working on a machine vision project with LabVIEW.
      The camera will locate some parts and send their coordinates via TCP/IP 
      and I created a client also with LabVIEW to display these coordinates here is how the communication going.
      First, if the camera detects something then msg will be sent to the client to inform him.
      then if msg was received correctly client responds with another msg to request the coordinates. 
      at last, the server sends the coordinates to the client. 
      here I faced some problems
      1- the msg sent are with variable length ("x=0,y=0,Rz=0"==> "x=225,y=255,Rz=5" ==> "x=225,y=255,Rz=90"  length vary between 16 and 22 ) with the constant "byte to read " it will not display the full msg.
      2-the client works fine but at a certain time, it shows errors like ("LabVIEW: (Hex 0x80) Open connection limit exceeded";;;;;; "LabVIEW: (Hex 0x42) The network connection was closed by the peer. If you are using the Open VI Reference function on a remote VI Server connection, verify that the machine is allowed access by selecting Tools>>Options>>VI Server on the server side"
       
       





    • By drjdpowell
      I am just starting on trying to be able to use Python code from a LabVIEW application (mostly for some image analysis stuff).  This is for a large project where some programmers are more comfortable developing in Python than LabVIEW.  I have not done any Python before, and their seem to be a bewildering array of options; many IDE's, Libraries, and Python-LabVIEW connectors.  
      So I was wondering if people who have been using Python with LabVIEW can give their experiences and describe what set of technologies they use.
    • By Yaw Mensah
      I have installed Labview 2020 on Dedian Buster using the rpm to deb conversion method via alien. Due to Architecture mismatch i deleted the *i386.rpm files before conversion.
      My Problem is that after creating a project at "Build Specification"-> "rigth click" i am only able to select "Source Distribution". Application does not show up as an option. 
      I will be grateful for any suggestions.
      Thank you in advance.
    • By javier_r
      VIPM.io now allows you to post LabVIEW Resources, Ideas, and Tools. For example, you could post a link to a video tutorial or blog article about a package. You can also post ideas, like feature requests or new tools. Best of all, package developers are notified when you post your ideas and resources, and you can comment and discuss posts with the community. Take a look at this video to learn more: https://www.vipm.io/posts/664960df-f111-4e13-989a-24be8207182d/

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.