Jump to content

Error:Missing DAQmx VIs in EXE running on development PC


khmlv

Recommended Posts

Dear Sir,

We have built an exe which has DAQmx and other sub VIs included in the dependencies automatically. The EXE builds successfully.

 

However, when we run the exe on the development PC, it gives an error saying DAQmx VIs and Read delimited spreadsheet VI missing. Pls find attc. screenshot for error.

 

Kindly help us to resolve the problem.

Thanks,

Regards,

khmlv.

DAQ-MX Missing VI Errors.jpg

Link to comment

Is this EXE ran on the same exact PC that the EXE was made on?  Because that doesn't seem right if it is.  I'd suggest doing a repair install of DAQmx and see if it resolves it.  Even so the best course of action when making an EXE is to also make an installer.  This is because when making the installer you can choose to include all the external NI dependencies like DAQmx, VISA, NI-DMM, NI-XNet, etc.  In newer versions of LabVIEW it can detect what installers it needs to include and select them by default.  Then you can take this one installer (which might be a bit big) and install it on any computer which has no previous NI software, and your application should run.

Link to comment

Dear All,

 

Yes. This exe runs on same PC on which it was made. We also tried repairing and making installer before running. however it dosent work.

 

We have attached a zip file of sample project made in Labview 2015 64 bit which gives DAQmx ,Read/Write delimted and report generation related errors as mentioned above in the exe (which is run on development PC). However, the VIs run in development mode without errors.

 

Kindly store the project in C Drive to run VIs without modifications.

 

There are 3 screens in this project. We have tested running Project VIs with following conditions:

 

Condition1-  Start-up VI: Screen 1 

A button on the screen1 opens Screen 2. Similarly, Screen 3 opens with button on Screen 2.When Screen 3 opens,which has DAQmx ,Read/Write Delimited VIs and report generation VIs, it gives missing VIs error in exe(broken arrow).

 

Condition2-  Start-up VI: Screen 3

On start-up, Screen 3 VI runs without error. However, when we go to screen 2 and back to screen 3, it gives missing VIs error in for screen 3 in exe(broken arrow) for DAQmx ,Read/Write Delimited VIs and report generation.

 

We find this very strange.

Please help us find some solution.

 

Thanks.

Pump_Test_Bench_Project.zip

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.