Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 12/04/2017 in all areas

  1. 20 points
    After I made this post I decided to bring the LabVIEW Wiki back online. It was not easy and took several days of server upgrades and hacking. The good news is I was able to bring up all the original pages.. The even better news is I talked with @The Q and @hooovahh and we are all on the same page as to how to move forward. @The Q did a great job of stepping forward and trying to fill the void that the LabVIEW Wiki's absence had left. He's agreed to migrate all the new content he created over to the LabVIEW Wiki, from Fandom and continue to develop new articles and content moving forward on the new site. He will also help in moderating the Wiki and will be promoted to Admin rights on the Wiki. His help is much appreciated. The LabVIEW landing page created here on LAVA is awesome but the forums don't lend themselves to static content creation. Instead @hooovahh has agreed to move the old landing page to here. That will be the new home for the landing page. This will become a valuable resource for the community and I hope all of you start pointing new people in that direction. With many editors, it can only get better and better over time. Where do we go from here: Logging in. - The old accounts are still there. If you're a LAVA old-timer, then you can try to login using your LAVA username. If the password doesn't work then reset it. You can also create a new account here. I'm going to announce a day when new accounts can be created. I'm limiting it for now because of all the spam accounts that can be potentially created. There's an issue with the current Captcha system. if you are super-eager to start creating content now and want to help, send me a direct message on LAVA and I can manually create an account right away. - New account creation is now open. Permitted content: - I'm not going to put restrictions on content at the moment. Obvious vandalism or offensive\illegal content will not be tolerated of course. However, the guidelines will be adjusted as time goes on and new content is created. There's just not enough content right now to be overly concerned about this. We need content. Discussions about the Wiki. - Each article page has an associated discussions page where you can discuss issues related to that article. Please use that mechanism (same etiquette as wikipedia). General Wiki issues\questions and high level discussions can be done here. So now, if you need to add content, you can do it yourself. Feedback as always is welcome.
  2. 16 points
    The content on this page will go away soon. It's currently being migrated. > New Location < Read about the wiki here This thread is intended to be a place for all things LabVIEW to be able to be found. If you have a resource for LabVIEW feel free to reply with your own content. We are interested in things like person blogs, forums, training information, and anything a user of LabVIEW might want. Several links and sections have been lifted from another resource available over on NI labeled the Content and Communities for LabVIEW Application Development. I'm New To LabVIEW and Need Help Basic Training Information NI Learning Center NI Getting Started -Hardware Basics -MyRIO Project Essentials Guide (lots of good simple circuits with links to youtube demonstrations) -LabVEW Basics -DAQ Application Tutorials -cRIO Developer's Guide Learn NI Training Resource Videos 3 Hour LabVIEW Introduction (Alternate Google Drive) 6 Hour LabVIEW Introduction (Google Drive) Self Paced training for students Self Paced training beginner to advanced, SSP Required Rookie Mistakes in LabVIEW by Digilent State Machine Design Pattern Basic Tutorial Wikipedia Article Sixclear Video Event Driven Design by NI Beyond Basic Training These are topics that are useful but not for those new to LabVIEW or software development. Topics may cover things a novice may have a hard time following. Object Oriented Software Design NI FAQ on Object Oriented Programming Creating Classes When Should you Use Classes Abstraction Abstraction Distraction Introduction to Object Oriented Programming and HAL by Elijah Kerry (Video), Plugin Framework JKI Hardware Abstraction Video Actor Framework Community Introduction Framework Basics Error Handling Basics by NI David Maidman’s Blog Post SOLID Error Handling by Dmitry Structured Error Handler Express VI by NI I Have Questions LAVA Forums - Independent community, with less NI oversight, and generally less new users asking basic questions NI Official Forums - NI's official forum, monitored semi-regularly by NI and the best place to find official support LabVIEW on Reddit - Smaller community but has Reddit features like voting on posts and comments causing interesting topics to get more attention LabVIEW on Stack Overflow - Q&A style community I'm Looking to Find Example Code and Toolkits NI Tools Network - Polished released code distributed as VIPM packages. LAVA Code Repository - Place for Verified, and Unverified code allowing for discussions, in addition to hosting NI Code Exchange / Community Documents - Similar to LAVA but NI's site licensing means less flexibility if you are posting code and want a custom license. NI Reference Designs Portal GitHub - Trending LabVIEW Projects, and All LabVIEW Projects GitLab - LabVIEW Projects BitBucket - LAVA Projects on BitBucket I'm Looking for Blogs There are lots of LabVIEW blogs, covering lots of topics. Some blogs go cold after some time, so below is a table of blogs, highlighting the last post made. At the moment this is updated manually so this will need to be updated periodically. NI's Blog NI's official blog, updated very frequently System Automation Solutions 10/24/2018 Sam Taggart's Blog JKI Blog 9/13/2018 Blog often highlighting JKI's activity including VIPM and other LabVIEW tips DMC Blog - 9/10/2018 LabVIEW category of DMC's official blog Steve Watts Random Ramblings on LabVIEW Design - 10/23/2018 Random Ramblings says it all but often good insight into designs and discussions we don't think about but should question why we use them and how Delacor Blog - 9/4/2018 The Daily CLAD - 9/4/2018 Hooovahh's Blog - 8/24/2018 Brian Hoover's blog focusing on LabVIEW and CAN The LabVIEW Lab - 10/22/2018 Eric Maussion's blog Bloomy's Blog - 8/13/2018 LabVIEW category of Bloomy's official blog Ajay Blog - 10/10/2018 Ajayvignesh's LabVIEW blog Wiresmith - 9/25/2018 James McNally's Blog LabVIEW Craftsmen - 7/3/2018 Wineman Technology Blog - 10/10/2018 LabVIEW category of Wineman's official blog MGI Blog - 6/5/2018 Moore Good Ideas blog Eyes on VIs - 5/25/2018 Christina Rogers blog often focusing on LabVIEW's visual design UI's and UX's QControls - 5/15/2018 Blog series on QControls, and open alternative to XControls Walking The Wires - 5/11/2018 Chirs Roebuck's Blog Not a Tame Lion - 5/5/2016 LabVIEW Artisan - 2/5/2015 Darren Nattinger's LabVIEW blog often highlighting lesser known features of LabVIEW Culverson Software's Blog - 9/20/2014 LabVIEW category of Steve Bird's Blog VI Shots - 7/31/2014 LabVIEW video podcast by Michael Aivaliotis Brian Powell - 12/26/2013 I'm Looking for Videos Similar to blogs, video channels can be hit or miss, and content can become dated. But if you are more of a visual learner these channels offer a chance to learn by watching others. NI Week & CLA Conference - Username: LabVIEW_Videos, Password: LabVIEW GDevCon Conference LabVIEW Architects Forum Delacor's Channel System Automation Solutions LLC Dr. James D Powell NI's LabVIEW Channel LabVIEW ADVANTAGE LabVIEW MakerHub Looking For Certification Help Certification Nugget: CLAD - Certified LabVIEW Associate Developer Certification Nugget: CLD - Certified LabVIEW Developer Certification Nugget: CLA - Certified LabVIEW Architect Connecting With Other LabVIEW Developers User Groups Online communities are a great way to connect and contribute. In addition to online there are Local LabVIEW User Groups which meet regularly to present and understand LabVIEW and NI topics. Find one close you you and subscribe or monitor topics. NI often supports local user groups, but they are in most cases ran and organized by the community. NI Week NI Week is another great way to connect with and learn. Hosted in Austin Texas once a year it is a week long conference with training, discussions, keynotes and other activities. Many previous NI Week videos can be found online but no single source is available which aggregates all marketing, keynotes, and technical sessions in one location. The best resource for content is a site setup for video hosting done by Mark Balla over the years. Summits If you hold a CLA or CLD there are specific summits for you that are free. These are often tailored presentations for a specific skill set with the focus on technical discussion and problem solving. There are two CLA summits, one in Austin Texas, and one in Europe both held once a year. CLD summits happen more frequently and locations change from year to year. Consult their specific discussion forums on NI to see when the next one is. Just like NI Week Mark Balla has several videos available here. Needing Professional Help If a project is getting out of hand and is beyond the skill level of your team, NI suggests looking at one of their Alliance Partners. Contact one in your area, and they will help try to best guide you on your project. I Want To Contribute to the Community Developing Code For Others Arguably the most difficult thing about sharing code, and reusing code, is the mind set and considerations associated with other developers using software you wrote. It is a type of mental exercise where you need to put yourself in the mind of the developer using your software. NI's Reference Deign Portal is a good resource for understanding various coding structures, and best practices for designing code for others, and can help with standardizing code for other developers. TBD (Expect this to be a section on various forums, and code repositories that can be added to along with helping out local user groups, and presenting at NI Week and Summits) Other Important Software Topics Source Code Control (SCC) Recommended SCC for LabVIEW Software Configuration by NI Code Management at Center of Excellence VisualSVN - Free SVN Server Software Delacor Blog with SCC Category -SVN Setup for LabVIEW By Delacor (Video) -Git Setup for LabVIEW By Delacor (Video) SOLID Principals Agile Software Development Principles, Patterns, and Practices (book) How Applying Agile Object-Oriented Design Principles Changes Designs and Code by Dmitry SMoReS development Unit Testing NI Unit Test Group VI Analyzer (Automated Code Inspection) The VI Analyzer is a tool by NI that is included with some versions of LabVIEW and allows for automated inspection of LabVIEW software, to check for various conformity or nonconformity to software practices. The VI Analyzer comes with many useful code checking steps but others can be added. Checkout the VI Analyzer Enthusiasts for more community made tests. LabVIEW Style Checklist Center Of Excellence - Learning VI Analyzer LabVIEW Style Guide Rules to Wire By Part 1 Rules to Wire By Part 2 Virtual Machine Usage TBD
  3. 11 points
    You know how you can change the wire appearance for a class in the class properties? As it turns out, LabVIEW internally allows for more flexibility than that dialog gives you. So I made an advanced wire editing tool...and unlike a lot of stuff I post, you can actually use this for serious projects, because it does not use any private/unsupported LabVIEW functionality! With this tool, you can set wire size without limits (with results similar to this), customize both wire layers with any 8x8 monochrome pattern, and also mess with different draw options. Strangely, a few of these settings seem to have no effect, and many of the options for one of them actually crash LabVIEW. (These ones are disabled in my tool, but you can re-enable them by editing a typedef.) Given that this is actually a documented, supported property that's officially supposed to work, I've reported this as a bug to NI; if any NI engineers see this and feel like investigating, you can refer to service request #7762024. Latest version: Wire Studio 2.zip Old versions: Revision 1
  4. 9 points
    Hey folks. this year we're trying something new. All Videos for NIWeek 2019 can be found here: https://labviewwiki.org/wiki/NIWeek_2019 Feedback welcome. Thanks to @Mark Balla and other volunteers for recording the videos. Edit: We're starting to add the back catalog to YouTube. NIWeek 2018 videos are also up.
  5. 9 points
    Tecnova has created a new LabVIEW Video site to replace the previous ftp server for downloading NIWeek and CLA Summit videos. Location: https://labviewvideo.tecnova.com Login: LabVIEW_Videos (Not case sensitive) Pw: LabVIEW (case sensitive) Check out the LabVIEW Videos Tecnova site Demo to see all the features of the new site. For comment or feedback please email LabVIEWVideo@tecnova.com Thanks to Tecnova Management for supporting the LabVIEW Community. Note: Testing has shown successful downloads using Chrome, IE and Edge for Windows and Safari for Macs. FireFox however tries to auto play the video and may not work like the other browsers. LabVIEW Video Demo.mp4
  6. 8 points
    This is how I clear errors.
  7. 7 points
    So I wasn't there but there was a public announcement at GDevCon about a new edition of LabVIEW called Community Edition which is the LabVIEW Professional version (I read that as application builder included), and completely free with no watermarks for non-commercial use. NI hasn't made any post about timelines, or other details yet but I hear those are in the works. This is obviously a huge thing for LabVIEW as any monetary barrier to entry will discourage new developers from experimenting with LabVIEW. And then there is the fact that those that are familiar with LabVIEW, can keep up with the newest version outside of their company, or when they are between jobs.
  8. 7 points
    Greetings Friends of LAVA, colleagues, cohorts, and Wireworkers Extraordinaire -- it's LAVA BBQ time! Date: Tuesday, May 21, 2019 Time: 7:30-10:00 pm Location: Uncle Billy's Brewery and Smokehouse, 1530 Barton Springs Rd, Austin, TX 78704 (1.5 miles from Convention Center) Cost: $25 Early Bird (through April 30th) $30 Regular Admission (through May 20th) $35 Door Price (May 21st) Meal Options: Expect to enjoy your choice of meats (brisket, turkey, ribs) with sides like street corn, cole slaw, and bbq beans. A vegetarian option is available when purchasing tickets. Cash beer bar. Who: Everyone is welcome, including spouses traveling with you. Even if it's your first time, expect to recognize many faces/names from the forums and NI R&D. What to wear: It's a covered, outdoor venue in Austin during Spring, so dress for the weather and comfort. Door Prizes: We will have a drawing to give away prizes. All attendees are eligible and will receive a door prize ticket upon entry. See below about sponsoring a door prize yourself to share the love. Hope to see you there! Chime in once you buy tickets to let everyone know you're coming. ------------>>------------>> Get LAVA BBQ 2019 Tickets Here <<------------<<------------ The venue is a 30 minute walk from the convention center, or a $6 Uber. Get together and carpool, people are typically gathering at Challenge the Champions in the Expo Hall, which is great fun. There is a free parking garage behind the building. We'd love for you to sponsor a door prize - Continue Reading: If you or your company want to sponsor a LAVA BBQ door prize, please post a reply below. You can also include a small blurb about your company and a link to your website in the post below. By donating a prize you and your company will receive a small announcement of your choosing, during the event. We will ask you to write the announcement on a post-it note and will attach it to the prize to be read before awarding it. We love the door prizes, but we love time for socializing too. Here are some guidelines to keep our event balanced and streamlined. Single item donations work best. If donating more than one item, then multiple identical items is strongly preferred. If donating non-tangible items or something that is not physically with you, then please bring a card with your contact info and instructions on how to collect the prize. This will be given to the winner. Donations are typically $25-$200 in value. Not recommended: Apparel (hats, t-shirts, underwear, etc.) - never the right size Software licenses (Toolkits, add-ons, LabVIEW) Branded trade show booth type giveaways (mouse pads, pens, keychains, etc.) Jokes or something meant as a gag and not a real prize
  9. 7 points
    There are a bunch of objects in LabVIEW that aren't exposed in the default palettes, and are normally inaccessible except through scripting. I made a Quick Drop plugin that exposes all of these. Many of these are no longer supported, and others never were supported in the first place. Hidden ones are displayed with an "X" next to them to warn you: as I often say, be careful with these, and don't use them in any code you care about, as they can cause crashes, data corruption, and who knows what else! Download the LLB below and place it in your <LabVIEW install dir>\resource\dialog\QuickDrop\plugins folder. Then press Ctrl+Space, Ctrl+S to open this dialog. Select an item from the list and click OK, and there you go. There's some interesting/strange stuff in here! EDIT: Couple things I forgot to mention. The first time you open this (and whenever you rebuild the list) it uses two private properties on the app reference, to get the list of controls and indicators in the palette. Since this is just a property read, I'm sure the worst that could happen is a crash when you try to open the dialog, but I can't make any guarantees. Also there's some false positives for hidden items, mainly with front panel controls/indicators that come in different styles. Place by Style.llb
  10. 7 points
    Greetings Friends of LAVA, colleagues, cohorts, and Wireworkers Extraordinaire -- it's LAVA BBQ time! Change log for 2018: Prices have been rolled back to a previous, cheaper version New location, see below Date: Tuesday, May 22, 2018 Time: 7:30-10:00 pm Location: Uncle Billy's Brewery and Smokehouse, 1530 Barton Springs Rd, Austin, TX 78704 (1.5 miles from Convention Center) Cost: $25 Early Bird (through May 4th) $30 Regular Admission (through May 20th) $35 At the door (May 21st - 22nd) Meal Options: Expect to enjoy your choice of meats (brisket, turkey, ribs) with sides like mac and cheese, cole slaw, and potato salad. A vegetarian option is available when purchasing tickets. Cash beer bar. Who: Everyone is welcome, including spouses traveling with you. Even if it's your first time, expect to recognize many faces/names from the forums and NI R&D. What to wear: It's a covered, outdoor venue in Austin during Spring, so dress for the weather and comfort. Door Prizes: We will have a drawing to give away prizes. All attendees are eligible and will receive a door prize ticket upon entry. See below about sponsoring a door prize yourself to share the love. ------------>>------------>> Get LAVA BBQ 2018 Tickets Here <<------------<<------------ The venue is now a 30 minute walk from the convention center, or a $6 Uber. Get together and carpool, people are typically gathering at Challenge the Champions in Exhibit Hall 4, which is great fun. There is a free parking garage behind the building. We'd love for you to sponsor a door prize - Continue Reading: If you or your company want to sponsor a LAVA BBQ door prize, please post a reply below. You can also include a small blurb about your company and a link to your website in the post below. By donating a prize you and your company will receive a small announcement of your choosing, during the event. We will ask you to write the announcement on a post-it note and will attach it to the prize to be read before awarding it. We love the door prizes, but we love time for socializing too. Here are some guidelines to keep our event balanced and streamlined. Single item donations work best. If donating more than one item, then multiple identical items is strongly preferred. If donating non-tangible items or something that is not physically with you, then please bring a card with your contact info and instructions on how to collect the prize. This will be given to the winner. Donations are typically $25-$200 in value. Not recommended: Apparel (hats, t-shirts, underwear, etc.) - never the right size Software licenses (Toolkits, add-ons, LabVIEW) Branded trade show booth type giveaways (mouse pads, pens, keychains, etc.) Jokes or something meant as a gag and not a real prize Hope to see you there! Chime in once you buy tickets to let everyone know you're coming.
  11. 7 points
    I just became aware of this thread and I'm not going to go back and comment on all the discussion points that have been made before, except to say: The original code which did not use a shift register was wrong, but happened the work because of a bug in the LabVIEW inplaceness algorithm. Any input tunnel should retain its original value of every iteration of the loop, so it should've stayed not-a-refnum every time, and therefore the dynamic registration should should have been lost where the loop iterated. The issue was that the left dynamic registration terminal (which is always in-place to the right one) was also in-place to the input tunnel, causing its value to be stomped incorrectly. This is clearly a bug and needed to be fixed. It violated dataflow 'rules' for how tunnels are supposed to behave, and could've made some correct programs yield incorrect behavior. This is not a change that would break a correctly written program, so it does not qualify as an "API breaking" change; this usage has always been wrong but happened to work due to a bug. (This is categorically different than changing behavior of correct code or even changing undocumented behavior, which we try strenuously to avoid.)
  12. 6 points
    You people are so laid back and forgiving. I’m an editor on multiple wikis across cyberspace, and none of the others are anything less than draconian. Capitalization whatever?! Wow. I’m going to need to wear my oversized Hawaiian shirt and cargo shorts when I’m editing, just to get in the right state of mind! 🙂
  13. 6 points
    We'll grow into it eventually 😋
  14. 6 points
    I just started down the rabbit hole of making a new XControl recently. Oh man such a pain. Here is a little graph I made complaining about the XControl creation process, and the time needed to make something useful. Any alternative is appreciated.
  15. 6 points
    Door Prize! Two of these custom bluetooth speakers will be given away, sponsored by the LAVA BBQ itself! [Front and back views]
  16. 5 points
    I think this is a valid comparison: (from https://forums.ni.com/t5/LabVIEW/Global-Variables-Are-Better-than-Functional-Globals-So-There/td-p/1528392/page/5) You are either Novice or Guru 😋
  17. 5 points
    The best thing about a UDP joke is I don't care if you don't get it.
  18. 5 points
    The preference to use init methods instead of non-default class constants is so strong, LabVIEW NXG is planning to never support the feature. Any class constant there will always have only the class’ default value.
  19. 5 points
    I found it! Unfortunately it's deprecated. It takes dotted inputs as either names or ID codes.
  20. 5 points
    Proud to say that lavag.org and labviewwiki.org both get an A rating from an SSL labs security check. Even better than ni.com which is getting a B rating. 😎
  21. 5 points
    Hey LAVAmaniacs! It's been a while since I poked at the LAVA server. There seems to be a lot cobwebs and dust in the server room. The LAVA software hasn't been updated in a couple years. That's way too long. I'm going to jump in and see what I can do about upgrading the LAVA back-end to the latest and greatest. This will fix many issues. Last time I tried this, it failed and I had to revert back. I didn't plan on it failing and didn't allocate time for getting tech support from Invision. This time I'm planning for the upgrade to fail and then getting Invision support involved. This means the site might be offline for a few days beyond the weekend. Sorry, but it's a small pain we have to go through for long-term stability and security. Don't worry though. This time I have a crack team to help me out:
  22. 5 points
    Wow, those LAVA cats really worked overtime. Looks like the site is back up and working. Let me know if you notice anything strange. Thanks for your patience! I just noticed we now hav a leaderboard. Cool.
  23. 5 points
    Automatic error handling is for noobs.
  24. 5 points
    Two door prizes from Arktur Technologies this year. First is the classic text from 2002. Second is a brand new book first published in September 2017 ...
  25. 5 points
    How come the diagram on the speaker has a backwards wire, an unnecessary coercion dot, and an obsolete analysis VI call?
  26. 4 points
    You can extract the labels from the type descriptor, once you know where to find them in the array. I added support for it in this open source DataManipulation library. Check out the OpenDescriptor palette. You can install the latest release (1.1.0.5) from here: https://github.com/LabVIEW-Open-Source/DataManipulation/releases/tag/1.1.0.5 (download VIP file and install with VIPM). Once installed, you'll find the "List Element Names" method under Addons>DataManipulation>OpenDescriptor palette. (It can list enums and cluster elements as well, although those are natively supported under the Variant Utilities palette.)
  27. 4 points
  28. 4 points
    Writing the notes forced me to watch the videos closely. I'm going to use the notes as a quick-ref whilst getting started and hoped others might have a go if they had them too. Feel free to make changes/fix wrong stuff in whatever way you like - expect you're a busy man. I'm happy to own the doc and expand it given the info. It's written in libreoffice writer, which exports a good pdf. Now looking fwd to cooking up a few actors. LabVIEW_Messenger_Library_-_Programmers_Notes_v1.8.odt LabVIEW_Messenger_Library_-_Programmers_Notes_v1.8.pdf
  29. 4 points
    Thanks to hooovahh for posting information before I could get to it. Most of you already know me but for those of you who don't, you can always reach out to me directly if you have questions or concerns about LabVIEW. As he stated, the 2018SP1 installer was not complete and wasn't supposed to go live online when it did. Our apologies to everyone who downloaded it and found it to be incomplete. The issue with the installer has been fixed and we will release the finished product/installers soon. My personal apologies that our installers were so eager to get out the door and into your hands that they didn't wait for all of the final testing to be complete. When we do our next get together at the CLA conference, LV Champions call, NIWeek, or other LabVIEW-related event, feel free to come find me and let me know how we can best improve LabVIEW to help you.
  30. 4 points
    I think it would be possible for JKI to add besides the JKI package repository and the NI Tools Network repository one more well known repositorey such as a LAVA URL to the free edition. That would not be a big deal to add I'm sure. Another option I would definitely consider, is a paid version of VIPM that costs a small fee but then allows to add custom repositories to that client. You still would need a full pro license to create new repositories but not to access them. The current license model is impossible to defend in a company as ours where you not only need a pro license to create your own company wide repository, but anybody wanting to access that repository needs that license too in order to add it to the locations VIPM will check for packages. So something like the free community edition as now with additional LAVA repository added. Then an intermediate Developer Client edition that allows to subscribe to custom repositories that everybody in a company could use. And last but not least the full featured VIPM Pro as it is now. The old OpenG package manager could more or less do the two first editions already, it is just outdated and doesn't handle new LabVIEW file tyypes properly anymore, that were coming out with LabVIEW 8 and later. EDIT: About 2 years ago we were evaluating in our company how to manage internal libraries and the distribution thereof. VIPM was considered too but the fact that every developer would need a Pro license killed that idea very quickly. If there would have been a Developer Client edition that normal LabVIEW developers could use and could have been purchased as a site license for a feasable fee, I'm pretty sure we would have been able to get that solution approved together with a few Pro licenses.
  31. 4 points
    Hi All Apologies if this isn't the correct forum to post this on but I wanted to let the community know about a new LabVIEW podcast series I am running - The Quick Drop Podcast QDP LogoQDP is a community driven podcast that I want to use to talk about LabVIEW and engineering/Science in general via a medium that I don't think we currently make the most of. So far we have 2 episodes which are available on most podcast platforms (i'll link some below too): Ep 0.1 - Intro: A brief intro to me & rasons behind the podcast Ep 1.0 - NI Linux Real-Time Controllers with Neil Crossan: I am Joined by Neil Crossan, a Certified LabVIEW Architect, TestStand Developer & Certified Professional Instructor who works in ATE development. Neil shares his experiences with the cRIO platform & some headwinds he's had using the current platform as well as addressing some of the ways he's customised and optimised the NI Linux Real-Time OS. I am actively looking for more people to do episodes on, so if you have an idea please contact me: E-mail: info@tthequickdroppodcast.com Twitter: @quickdroppod Links: Apple Podcasts Spotify Anchor Stitcher Thanks! Jono J Hobson Certified LabVIEW Architect
  32. 4 points
    Hey fellow LAVA people. I just turned 50 on April 2nd, and wanted to do something challenging for me, both mentally a physically. I'm running 10K every day for a year and raising money for cancer research. If you want to follow along on my journey, you can subscribe to the 10K365 youtube channel for the latest. Then go on over to 10K365.com and give whatever you can. Thanks, I consider all of you as friends and one of the reasons I love LabVIEW.
  33. 4 points
    VI Shots LLC will be donating an Apple TV 4K 32Gb More info here: https://www.apple.com/apple-tv-4k/
  34. 4 points
    DISTek will be giving away an Arduino based Sparkfun Kit. https://www.sparkfun.com/products/14556
  35. 4 points
    Hardly "rusty". Any software that is still at 1.0.1 after years of use is made of stainless steel People just don't know how to release fully featured and tested software any more. Users have been conditioned to think that software that is continuously updated and fixed can only be good when, in reality, it is a testament to how poor the design, implementation and testing is.
  36. 4 points
    Hello everyone, I don't know if you have seen/heard about the GDevCon @Steve Watts and his chums (as he calls them) are organizing. It is GDevCon#1, some of the things I think our LAVA friends will love are: It is independent from NI, created and driven by the community Two day conference Focused on real problems encountered everyday by LabVIEW developers Open to everyone (you don't need to have any certification like CLAD, CLD, CLA, etc). The conference will take place in September 2018 somewhere in the UK. If you want to learn more, register at: https://www.gdevcon.com/ Regards, Fab
  37. 3 points
    My first ever meme prompted from this post
  38. 3 points
  39. 3 points
    Loving this central location of organized and searchable LabVIEW knowledge! (Just like LAVA.😁) I've made a couple of small contributions to this so far. Mostly clicking on "Random Article" and reviewing it for typos and broken links. I set somewhat of a personal goal of trying to do this at least once per workday. Every little bit helps, right? Granted, they're not contributions on a grand scale yet, (i.e I'm not creating articles, etc.) but maybe I'll get there. This is my first time contributing to a Wiki of any kind, so I'm a n00b at it.
  40. 3 points
  41. 3 points

    Version 1.0.0

    112 downloads

    There it is. The complete library for the MCP2221A. I2c adapter, I/O in a single IC. I love that one. Let me know if any bug is found. I try to make that library as much convenient as possible to use. Two version available 32 bit and 64 bit. little note: to open by serial number, the enumeration need to be activated on the device first. (open by index, enable the enumeration) It needs to be done only once in the life time of the device. PLEASE do not take ownership of this work since it is not yours. You have it for free, but the credit is still mine... I spent many hours of my life to make it works.
  42. 3 points
    Where to start. A wiki here a wiki there, everywhere a wiki. We used to have a section on LAVA which was like a Wiki many many years ago. However, I shut it down. Reasons: Users didn't know it was a Wiki and instead of posting questions to the forum, would create new Wiki pages with their questions. This was a nightmare to moderate. It was setup so that when you created a Wiki page, the discussions for that page, would be linked to dedicated forum threads. Again, more confusion, since it was not a model commonly used elsewhere on the web. The forum\wiki blend was not very intuitive and it made the site hard to "figure out". Nobody cared or understood the wiki. A handful of people used it and never really caught any steam. After that experiment was shut down, I decided to create a separate domain dedicated to the LabVIEW Wiki. It was labviewwiki.org. I still own this domain. I think this was 2009, I don't recall. But anyway, I used the same open-source software that powered wikipedia, mediawiki. Here's the wiki-index page: https://wikiindex.org/LabVIEW_Wiki. Seems like it had around 300 pages. MediaWiki is super powerful, but not intuitive for new editors. I spent most of the time creating templates and documentation describing how to edit pages. I created a lot of the content but there were some others who added unique content like all the LabVIEW ini keys. All the keyboard shortcuts. All the hidden scripting features (before it was mainstream), etc. It was pretty cool. And yes, we had awesome landing pages and getting started pages that I spend hours and hours crafting. I was young and motivated. The problem was that we got struck with a rash of spammers. More like bots. They would go through and create hundreds of pages overnight. In that environment, you need moderators and editors to delete the pages and watch for edits. I was the only moderator and admin. So my plate was full. I ended up locking it down and forced it so that you had to have a login account to edit pages. On top of that, the login's had to be manually approved by me to prevent bot accounts. Of course, a wiki cannot be maintained or augmented by one person. The whole point is to have a community edit the pages. Not sure if Wikia (or MediaWiki) has solved the spamming issue. @The Q, I noticed a lot of the content is scraped from ni.com. Have to be careful about this and copyright claims. One thing I was very careful about with the LabVIEW Wiki I worked on was to create original content as much as possible. Also, what's the point of just duplicating ni.com. That's pointless in my opinion. Google does an excellent job of getting the info you need from multiple sources. But that's my opinion and the community edits should drive that of course. Sounds like the community wants to reboot the Wiki idea like Hollywood reboots comic book heroes. Sure, let's see where this goes. @The Q seems to be enthusiastic about it. Are there others here willing to put the time and effort into building the content? Any volunteers? If there is some real interest, then I can try to resurrect the old Wiki content and domain (not sure if the content it's salvageable, but I can try). Then we can go from there. I don't have time to admin the site but I can hand over the keys to someone that has more time.
  43. 3 points
    I learned a lot about serialization from writing my library. Took me 2 years of research and planning. "All I want to do is flatten and unflatten some data and I need a library of 900 VIs to do it?!?!?!!" Yes, give or take a couple hundred. Turns out serialization is really a lot more complex than I ever would have thought when you really get down to the core. Bloating the string is one of the most fascinating issues, something I totally ignored when I created the original flatten-to-string behaviors for LV classes. To flatten an object, you obviously need to record the type. But what about an array of objects? Do you need the type for every element in the array? Yes, if the array is heterogenous; no if it is homogenous. Can that be factored out? Depends upon what you plan to do with the string! If you're always going to start at the front of the string and unflatten all the data then you can factor out lots of stuff because you have context for the remainder of the string. But if you're going to fly along the string and find subportions to pull out then you need every subportion to be a complete record. "I have an array of 10000 objects. I need only 1 of them." That's a real serialization requirement and it has severe impact on the format of the string itself! Formatting for localization, formatting for versioning, formatting for different encodings, formatting for transmission (requires more redundancy in the data), pretty-printing for human readability... it's a mess. The one main takeaway I had from my project? I support trade embargoes on any nation that tries to use a comma for a decimal point. I know... Britain and the USA are outliers here, but, seriously, it's called a "decimal point"... stop putting a tail on it! I can deal with two different systems for units. I can deal with myriad ways to format a timestamp (even different calendars). I'm supportive of arcane Unicode encodings so that every language ever can be recorded. But I hit my breaking point on commas as decimal points. Why would I want to live in a world where I can order a 1.125 meter steel beam then be charged for delivery of something over a kilometer long?!?! This table should not exist. Yes, my library provides support for such abominations, but it was while adding that feature that I became a strong proponent of cultural hegemony!
  44. 3 points
    It reminds me of the old quote about solving a programming problem using regular expressions. Punch-line : "Now you've got TWO problems"
  45. 3 points
    reshape array + index, inside of a diagram disable structure reshape array takes any dim array and returns 1-dim array. Index takes 1dim array and returns element. Disable structure makes sure the code doesn't run and that you always get the default value for the data type. any aggregation function (add array elements, array max and min, etc) will work too, but I think the reshape/index is clearer.
  46. 3 points
    To ensure NIER collects the most useful information, you need to set a few INI keys on the process that is executing the LabVIEW code (Development System: LabVIEW.ini in the LabVIEW directory; Run-Time Engine: in a [LVRT] section within the .ini file next to the executable). INI keys: NIERDumpType=full LVdebugKeys=True DWarnDialog=True DPrintfLogging=True promoteDWarnInternals=True Of these keys, you should always set the NIERDumpType=full key when debugging an issue, because this key will cause a larger crash dump with more debugging information to be created. The other INI keys can be used to gather more information, but they have the caveat that they will slow execution of the code down, which can be a problem for certain types of issues. It is also important to note that when NIER creates a full crash dump, it should not be submitted to NI through the NIER crash dialog. The NI system is not prepared to handle crash dumps as large as those generated by NIER with the INI key enabled. (I got this information from an NI support person long time ago, I'm not really sure if all of this still applies. But perhaps it helps?)
  47. 3 points
    New version is available. (LV2018 32-bit) http://www.ni.com/download/labview-development-system-2018/7406/en/
  48. 3 points
    The direct link to the "Software Platform Bundle" is available at: http://www.ni.com/download/web-based-installer-software-platform-bundle-spring-2018/7498/en/ This installer has the option to "download" or "install" that hooovahh mentioned. As far as what is included in this bundle, I don't see a document yet for 2018 Spring, but here is the 2017 Fall: http://www.ni.com/white-paper/54231/en/
  49. 3 points
    No mechanism exists to launch it. Attached to this post is a VI that has exactly the same front panel as the Edit Events dialog from LabVIEW 2017. You could put code behind it if you wanted to use it elsewhere, but the only thing currently on the block diagram is a bunch of FP terminals. Edit Events Dialog.vi
  50. 3 points
    Perhaps old news for many, but my NI Update Service does not tell me these things for some reason (yet to figure out why, it does bring other less needed updates to my attention...) and I have not seen anything about it elsewhere either, so perhaps it is news for others as well: I accidentally noticed that 2017 SP1 has been released . It was posted one week ago, on the 23rd of January...


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.